Cabinet combinations
Minimum height 216cm
to fit every kitchen
Other height combinations
Standard larder, including 15cm plinth,
without cornice or pelmet
(including 15cm plinth)
There are cabinet options for every space and all
the essentials. Create the perfect combination to
really get the most out of your kitchen.
Standard larder
1 With 3.5cm cornice/pelmet 219.5cm
2 With 7.5cm cornice 223.5cm
Tall larder
76cm min. from
top of pan supports
3 Without cornice or pelmet 234cm
4 With 3.5cm cornice/pelmet 237.5cm
(refer to product manual)
5cm min.
(30cm min.
to a wall)
d
m
Within 1m
of centre line
Cooker switch and
hood fuse in easily
accessible position
5 With 7.5cm deep cornice 241.5cm
Standard
larder
201cm
1
2
3
4
5
Gas
connection
(horizontal
position
variable)
Remember
75cm
Our larders Electrical
with cornice/pelmet
approx
and Variable
pelmetconnection
detailing are taller,
so check to see if you have the
height in your room to fit these.
Plinth 15cm
MinimumMinimum
height 216cm
height 216cm Other heig
O
Gas and electrical
regulations
CE marking on a product is the manufacturer’s
declaration that the product complies with
relevant conformity requirements of relevant
European legislation. The UKCA mark is the UK’s
new symbol to show that products comply with
applicable UK Regulations.
Choosing an NICEIC or ELECSA registered
contractor is a householder’s best way to
ensure a safe job. Electricians registered with
NICEIC and ELECSA are assessed on a regular
basis to ensure high standards and their work is
checked against the IET Wiring Regulations, as
well as other standards.
Any gas work must be carried out by a Gas Safe
registered engineer.
Standard larder,
including
15cm
plinth, 15cm plinth, (including 15cm
Standard
larder,
including
(in
without cornice
or pelmet
without
cornice or pelmet
Stan
1 With 3
2 With 7
3 Witho
(refer to product(refer
manual)
to product manual)
5cm min.
(30cm min.
49.5cm min. 49.5cm
tomin.
a wall)
to a 3.8cm to a 3.8cm
worktop and worktop and
with a 3.5cm with a 3.5cm
pelmet
pelmet
5cm min.
Cooker switch
and switch and
(30cm min.
Cooker
hood fuse in easily
toWithin
a wall)1m
hood fuse in easily
Withinaccessible
1m
position
accessible
position
of centre lineof centre line
4 With 3
5 With 7
Standard
larder
201cm
Standard
larder
201cm
1
Gas
Gas
connection connection
(horizontal (horizontal
position
position
variable)
variable)
75cm
75cm
approx.
approx.Electrical
Electrical
connection connection
Variable
Variable
Remember
• Hobs should have a minimum of 30cm work surface either side.
(Ideally 40cm either side of an electric hob and 50cm either side of a gas hob.)
• Ovens shouldn’t be located near entrances or where there is through traffic.
• Electrical sockets can’t be fitted within 30cm of a sink.
• Ovens should be separated from adjacent walls or end panels by at least 30cm.
• Gas hobs can’t be fitted within 30cm of any window and electric hobs within 5cm.
24
Tall
76cm min. from
76cm min. from
top of pan supports
top of pan supports
Plinth 15cm Plinth 15cm